Care, Cleaning & Warranty
Tips to preserve beauty and durability. Learn how to keep your Finger furniture flawless for years to come.
Environmental Conditions
Finger manufactures high-end custom furniture with exceptional quality and durability, ensuring products that last and remain in homes for many years. Therefore, before starting the installation, observe the following environmental conditions:
Humidity / Leaks
Check for leaks in plumbing, walls, flooring, and ceilings. Also inspect window and door frames, as they may allow water or moisture to enter. If necessary, replace the frame or request repairs to be performed by a qualified professional team.
Ventilation
Never block windows, doors, or passageways. All rooms must be ventilated to prevent mold or unpleasant odors. We emphasize that compliance with ABNT construction standards is essential to ensure that the environment is properly prepared to receive Finger products.
Pest Control
Perform pest control treatment before installation, observing the necessary isolation period before starting work with Finger products.
Sunlight
Check whether natural light entry points (windows, openings, doors) protect the space from direct sunlight. Direct sun exposure can damage furniture surfaces. Blinds, curtains, or window films are excellent ways to shield the environment. Pay close attention to this, as the warranty does not cover damage caused by sun exposure.
Cleaning the Environment
Finally, thoroughly clean the entire area. A clean, residue-free space minimizes the risk of infestation or damage to Finger product surfaces and structure. If using heavy-duty cleaning products, allow proper ventilation time and clean afterward to remove any substance that might come into contact with the furniture surfaces.
Cleaning Instructions
Robust Modulation – Panels, Doors, and Fronts
All Finger furniture products leave the factory pre-cleaned at the end of the manufacturing process. We recommend cleaning with a clean white cloth, lightly dampened with water and neutral soap. Then dry all Finger furniture surfaces thoroughly.
Do not use coarse-textured or firm materials, as they may scratch the furniture. Also avoid chemical or abrasive products, as they may cause irreversible damage.
Materials That Show Fingerprints
Some surface finishes naturally show fingerprints with handling. These are not defects but characteristics of the product. To reduce visible marks, clean with neutral detergent and a slightly damp white cloth, then dry with a clean dry cloth. Always clean in the direction of the wood grain to protect the surfaces.
Stroh Line (Natural Cotton Fiber Cane Doors)
Light dust: Use a vacuum cleaner with a brush nozzle or a feather duster.
Heavier dirt (stains): Clean with a soft sponge (preferably the yellow side), dampened with warm water and neutral detergent. The friction will loosen the dirt, creating foam. Wipe with a clean damp cloth to remove the foam and allow it to dry naturally.
Avoid using abrasives, bleach, or alcohol, as they will stain and damage the surface.
Stark Panels (Solid Wood)
Use a soft cloth slightly dampened with water only. Do not use abrasive products.
Aluminum/Glass Doors
Do not use knives or sharp objects to remove labels. Avoid contact with hard materials and sudden impacts when opening or closing doors. For cleaning, use paper towels or soft lint-free cloths.
Never spray cleaner directly on the glass, as it can damage furniture coatings and accessories (and eventually cause hinge oxidation). Spray the product on a cloth or paper towel instead.
Avoid cleaning under sunlight, which can cause streaks. First, use an absorbent paper to remove grease and grime, then clean. Use only water, neutral soap, or suitable cleaning products. Never use abrasives like steel wool, scouring pads, or harsh chemicals.
Frosted, Ribbed, and Miniboreal Glass
On the porous side, clean with a soft sponge dampened with water and neutral soap. Dry thoroughly with a clean white cloth.
Glass and Mirrors
Incorrect cleaning can damage the protective coating, cause stains from oxidation, and lead to faster deterioration. Use warm water and a cloth for the safest cleaning.
Avoid leaving edges wet after cleaning. Never use acidic, alkaline, or solvent-based cleaners, which can damage the surface, edges, and backing.
If using a glass cleaner, choose a neutral one without ammonia. Never spray directly on the mirror. Ensure edges are completely dry and residue-free.
A well-ventilated space prevents moisture condensation, which can be corrosive—especially in bathrooms, saunas, or heated pools. Where natural ventilation isn’t possible, use forced exhaust systems.
Argentate and Acid-Etched Glass
Use only a white cloth with hot water, followed by a clean dry white cloth to remove excess moisture. Do not use other cleaning products on this type of glass.
Accessories and Handles
Clean only with a dry white cloth, without any cleaning product or water.
Hettich Hinges
These components have a protective layer applied during manufacturing. Clean only with a dry white cloth. Avoid exposing them to humidity, salt air, or coastal environments.
Drawers
Clean with a cloth dampened with neutral soap and then dry with a clean cloth.
Hettich Quadro Slides
Do not attempt to clean the Quadro slides. These mechanisms contain protective layers not visible to the touch and must not be exposed to any physical or chemical agents.
Slides are engineered to support the weight of the drawers and typical storage loads. Do not overload drawers or use them as steps. Always supervise children around furniture.
Final Recommendations
Finger furniture surfaces are coated for durability under regular, everyday use. However, no product can withstand:
- Strong impacts
- Excessive weight
- Contact with sharp or pointed objects
- Contact with abrasive products
- Contact with paints
- Constant contact with excessive moisture, leaks, or rain
- Ensure the environment is prepared to receive Finger products
- Comply with ABNT construction standards to ensure proper installation conditions
- Check for plumbing leaks
- Ensure adequate ventilation to avoid mold and odors
Aggressive Agents in Daily Use
Some household substances (salt, lemon, vinegar, certain soaps, and especially harsh cleaning products) contain compounds that can permanently damage furniture surfaces. Always follow the cleaning procedures outlined in this manual.
Sinks and Basins
Always ensure proper sealing using high-quality silicone.
Sunlight
To prevent UV heat from damaging Finger products, equip natural light entry points (windows, doors, openings) with light control elements (blinds, curtains, window films).
Hinged Doors
Avoid leaning on doors. The number of hinges is calculated based on the size and weight of each door. Any additional load may misalign or damage hinges and doors.
Humidity
Do not place wet items on Finger products. As mentioned, excessive water can damage the surfaces.
Hot Objects
Do not place pots or containers directly from the stove/oven onto Finger furniture. This may cause irreversible damage. Always use proper heat-resistant bases.
